Ibm B50 Uživatelský manuál stáhnout pdf (Strana 51)

Performing an Emergency Eject

Note: Execute the following procedure only in an emergency, such as when the tray

does not open if the unload button has been pressed.

1. Insert a small diameter rod, such as a straightened paper clip, into the

emergency eject hole. (Refer to the illustration on page 2-17 for the location of

the emergency eject access.)

2. Push in the tool until you feel some resistance.

3. Maintain a small amount of pressure on the rod while pulling on the tray with

your fingernail.

4. Pull the tray open and remove the disc.

Note: Normally the tray makes a ratcheting sound when you pull it open using

the above procedure.

Chapter 2. Using the Server 2-19

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 220 221

Žádné komentáře

Ibm B50 Uživatelský manuál Strana 51