Ibm CFC2 Uživatelský manuál stáhnout pdf (Strana 24)

PCI-6871 User’s Manual 16

2.8.1 Connecting the hard drive

Connecting drives is done in a daisy-chain fashion. It requires one of two

cables (not included in this package), depending on the drive size. 1.8"

and 2.5" drives need a 1 x 44-pin to 2 x 44-pin flat-cable connector. 3.5"

drives use a 1 x 44-pin to 2 x 40-pin connector.

Wire number 1 on the cable is red or blue, and the other wires are gray.

1. Connect one end of the cable to CN1 or CN7. Make sure that the

red (or blue) wire corresponds to pin 1 on the connector, which is

labeled on the board (on the right side).

2. Plug the other end of the cable into the Enhanced IDE hard drive,

with pin 1 on the cable corresponding to pin 1 on the hard drive.

(See your hard drive’s documentation for the location of the con-

nector.)

If desired, connect a second drive as described above.

Unlike floppy drives, IDE hard drives can connect to either end of the

cable. If you install two drives, you will need to set one as the master and

one as the slave by using jumpers on the drives. If you install only one

drive, set it as the master.

2.9 Solid State Disk

The PCI-6871 provides a 50-pin socket for CompactFlash card type I/II.

2.9.1 CompactFlash (CN28)

The CompactFlash card shares a secondary IDE channel which can be

enabled/disabled via the BIOS settings.

2.10 Floppy drive connector (CN6)

You can attach up to two floppy drives to the PCI-6871’s on-board con-

troller. You can use any combination of 5.25” (360 KB and 1.2 MB) and/

or 3.5” (720 KB, 1.44 MB, and 2.88 MB) drives.

A 34-pin daisy-chain drive connector cable is required for a dual-drive

system. On one end of the cable is a 34-pin flat-cable connector. On the

other end are two sets of floppy disk drive connectors. Each set consists

of a 34-pin flat-cable connector (usually used for 3.5” drives) and a

printed-circuit board connector (usually used for 5.25” drives).

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 153 154

Komentáře k této Příručce

Žádné komentáře

Modelle	Dokumententyp
V-4200HTV	Bedienungsanleitung LG V-4200HTV Owner's manual [en] , 6 Seiten
V-CP243NBN	Bedienungsanleitung LG V-CP243NBN Owner's manual [et] , 6 Seiten
V-C5865CT	Bedienungsanleitung LG V-C5865CT Owner's manual [en] , 6 Seiten
V-KC403HT	Bedienungsanleitung LG V-KC403HT Owner's manual, 14 Seiten
V-C4560HTV	Bedienungsanleitung LG V-C4560HTV Owner's manual, 6 Seiten
V-5000HT	Bedienungsanleitung LG V-5000T Owner’s Manual, 7 Seiten
V-CP243RDB	Bedienungsanleitung LG V-CP243RDB Owner's manual, 14 Seiten
V-2600TE	Bedienungsanleitung LG V-2600TE Owner’s Manual, 12 Seiten
V-3546HTV	Bedienungsanleitung LG V-3546HTV Owner's manual [fr] , 6 Seiten
V-C2940NB	Bedienungsanleitung LG V-C2940NB Owner’s Manual, 6 Seiten
V-C4360HEV	Bedienungsanleitung LG V-C4360HEV Owner's manual, 6 Seiten
VT3310	Bedienungsanleitung LG VT3310 Owner’s Manual, 14 Seiten
V-CQ952ST	Bedienungsanleitung LG V-CQ952ST Owner’s Manual, 12 Seiten
VTC3742ND	Bedienungsanleitung LG VTC3742ND Owner's manual, 12 Seiten
V-CP953ND	Bedienungsanleitung LG V-CP953ND Owner's manual, 7 Seiten
V-C7760HTU	Bedienungsanleitung LG V-C7760HTU Owner's manual [en] , 33 Seiten
V-CA261ND	Bedienungsanleitung LG V-CA261ND Owner's manual, 21 Seiten
V-4350HTV	Bedienungsanleitung LG V-4350HTV Owner's manual, 6 Seiten
VTC3031NB	Bedienungsanleitung LG VTC3031NB Owner's manual, 6 Seiten
V-C3443NDV	Bedienungsanleitung LG V-C3443NDV Owner's manual, 6 Seiten

Ibm CFC2 Uživatelský manuál Strana 24

Komentáře k této Příručce

LG V-4030T Handbücher

Lg V-4030T Bedienungsanleitung (8 Seiten)

Inhaltsverzeichnis

Weitere Produkte und Handbücher für Staubsauger LG

Ibm CFC2 Uživatelský manuál Strana 24

Komentáře k této Příručce

Související produkty a manuály pro Hardware Ibm CFC2

LG V-4030T Handbücher

Lg V-4030T Bedienungsanleitung (8 Seiten)

Inhaltsverzeichnis

Weitere Produkte und Handbücher für Staubsauger LG