Ibm DS8000 Uživatelský manuál Strana 62
- Strana / 450
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
40 DS8000 Series: Concepts and Architecture
Primary power supplies
The DS8000 primary power supply (PPS) converts input AC voltage into DC voltage. There
are high and low voltage versions of the PPS because of the varying voltages used
throughout the world. Also, because the line cord connector requirements vary widely
throughout the world, the line cord may not come with a suitable connector for your nation’s
preferred outlet. This may need to be replaced by an electrician once the machine is
delivered.
There are two redundant PPSs in each frame of the DS8000. Each PPS is capable of
powering the frame by itself. The PPS creates 208V output power for the processor complex
and I/O enclosure power supplies. It also creates 5V and 12V DC power for the disk
enclosures. There may also be an optional booster module that will allow the PPSs to
temporarily run the disk enclosures off battery, if the extended power line disturbance feature
has been purchased (see Chapter 4, “RAS” on page 61, for a complete explanation as to why
this feature may or may not be necessary for your installation).
Each PPS has internal fans to supply cooling for that power supply.
Processor and I/O enclosure power supplies
Each processor and I/O enclosure has dual redundant power supplies to convert 208V DC
into the required voltages for that enclosure or complex. Each enclosure also has its own
cooling fans.
Disk enclosure power and cooling
The disk enclosures do not have separate power supplies since they draw power directly from
the PPSs. They do, however, have cooling fans located in a plenum above the enclosures.
They draw cooling air through the front of each enclosure and exhaust air out of the top of the
frame.
Battery backup assemblies
The backup battery assemblies help protect data in the event of a loss of external power. The
model 921 contains two battery backup assemblies while the model 922 and 9A2 contain
three of them (to support the 4-way processors). In the event of a complete loss of input AC
power, the battery assemblies are used to allow the contents of NVS memory to be written to
a number of DDMs internal to the processor complex, prior to power off.
The FC-AL DDMs are not protected from power loss unless the extended power line
disturbance feature has been purchased.
2.7 Management console network
All base models ship with one Storage Hardware Management Console (S-HMC), a keyboard
and display, plus two Ethernet switches.
S-HMC
The S-HMC is the focal point for configuration, Copy Services management, and
maintenance activities. It is possible to order two management consoles to act as a redundant
pair. A typical configuration would be to have one internal and one external management
console. The internal S-HMC will contain a PCI modem for remote service.
- The IBM TotalStorage Storage 1
- DS8000 Series:s: 1
- Contents ix 11
- Contents xi 13
- Floating spares 100
- Hot plugable DDMs 100
- 4.7 Power and cooling 101
- 4.7.1 Building power loss 102
- 4.8 Microcode updates 103
- 4.9 Management console 104
- 4.10 Summary 104
- Virtualization concepts 105
- LPAR Hypervisor 107
- Storage enclosure pair 108
- Loop 1 Loop 2 109
- 5.3.3 Ranks 110
- 5.3.4 Extent pools 111
- Extent Pool CKD0 112
- Extent Pool CKD1 112
- Extent Pool FBtest 112
- Extent Pool FBprod 112
- 5.3.5 Logical volumes 113
- Allocate a 3 GB LUN 115
- Logical 115
- 3 GB LUN 115
- 2.9 GB LUN 115
- LSS X'17' 117
- LSS X'18' 117
- DB2-test 117
- 5.3.7 Volume access 118
- Host attachment 119
- Volume group 119
- 5.3.9 Placement of data 121
- Host LVM volume 122
- Model Naming Conventions 126
- 6.1.2 DS8100 Model 921 127
- 6.2 Model comparison 130
- 6.3 Designed for scalability 131
- Adding DDMs 132
- Future plan 132
- 2-way I/O controllers 133
- 4-way I/O controllers 134
- Model Conversions 135
- 137
Související produkty a manuály pro Hardware Ibm DS8000
Hardware Ibm THINKPAD 600 Uživatelský manuál
(18 stránky)
(18 stránky)
Hardware Ibm 31P8128 Uživatelský manuál
(112 stránky)
(112 stránky)
Hardware Ibm 27L2579 Uživatelský manuál
(20 stránky)
(20 stránky)
Hardware Ibm 51 Uživatelský manuál
(248 stránky)
(248 stránky)
Hardware Ibm DR550 Uživatelský manuál
(128 stránky)
(128 stránky)
Hardware Ibm 22P7035 Uživatelský manuál
(54 stránky)
(54 stránky)
Hardware Ibm THINKCENTRE 8123 Uživatelský manuál
(44 stránky)
(44 stránky)
Hardware Ibm THINKCENTER 8189 Uživatelský manuál
(290 stránky)
(290 stránky)
Hardware Ibm 10GBE Uživatelský manuál
(12 stránky)
(12 stránky)
Hardware Ibm Enterprise Console Uživatelský manuál
(194 stránky)
(194 stránky)
Hardware Ibm SpotLine M110 Uživatelský manuál
(54 stránky)
(54 stránky)
Hardware Ibm ThinkPad 73P3297 Uživatelský manuál
(66 stránky)
(66 stránky)
Hardware Ibm MICRO TOWER 2169 Uživatelský manuál
(157 stránky)
(157 stránky)
Hardware Ibm 8317 Uživatelský manuál
(152 stránky)
(152 stránky)
Hardware Ibm 22P6979 Uživatelský manuál
(52 stránky)
(52 stránky)
Hardware Ibm ULTRABAY 2000 Uživatelský manuál
(62 stránky)
(62 stránky)
LG V-4030T Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Staubsauger LG V-4030T.
Wir stellen 1 PDF-Handbücher LG V-4030T zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Komentáře k této Příručce