Ibm THINKCENTRE 8123 Uživatelský manuál Strana 22

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 44
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 21
13. Release and pivot lever 1 upward. Remove the heat sink 2 from the
system board by carefully lifting it up and off the mounting bracket. Place the
heat sink on its side on a clean, flat surface so the thermal material on the
bottom of the heat sink does not touch the surface and become contaminated.
14. Release and pivot locking lever 2 securing the microprocessor 1, then
pivot the microprocessor retainer 3 until it is open.
14 Hardware Replacement Guide
Zobrazit stránku 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 43 44

Komentáře k této Příručce

Žádné komentáře