IBM ATM OC-3c Uživatelský manuál Strana 93

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 140
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 92
ATM Cable Specification C-3
To check that the bandwidth of your fiber is within an
acceptable range:
1
Divide the amount of bandwidth available according
to the fiber specification by the total length of fiber
(km).
2
If the result is lower than 250MHz, the link may be
prone to bit errors. You should shorten the length of
the fiber or use a different fiber until the result of the
calculation reaches 250MHz.
Example:
A cable with modal bandwidth of 500 MHz.km will
have 250 MHz of bandwidth at 2km (1.25 miles).
The same cable would have a 500MHz of bandwidth
at 1km (0.625 miles).
A fiber cable with a bandwidth specification of
200 MHz.km would have only 100MHz of bandwidth
at 2km (1.25 miles), which would not support ATM.
In this case, another type of fiber which has a
bandwidth of 155MHz would be required.
Zobrazit stránku 92
1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 139 140

Komentáře k této Příručce

Žádné komentáře