Ibm 2196 Uživatelský manuál stáhnout pdf (Strana 105)

Adding and removing adapter cards and drives

8-5

If you disconnected any cables to gain access to the adapter card connector on the

system board, reconnect the cables.

Removing adapter cards

Follow these steps to remove an adapter card:

1. Position the system unit so that the card is accessible to you.

2. If the adapter card has cables, disconnect them. Be sure to take note of

where the cables are connected. You will have to reconnect these cables

when you reinstall the card.

3. Remove the adapter card screw.

4. Firmly hold the adapter card and carefully pull it from the card connector.

5. If you are not reinstalling the adapter card, reinstall all other hardware and

screws that you removed prior to the removal of the adapter card.

Note:

If you are permanently removing the factory-installed

modem or replacing the modem with a different type,

use the Windows Add/Remove Software feature in the

Control Panel to remove the modem software. You

must remove the modem software before removing the

modem or installing a different modem.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 207 208

Žádné komentáře

Ibm 2196 Uživatelský manuál Strana 105