IBM F50 Uživatelský manuál stáhnout pdf (Strana 217)

100

101

12. If you are using an internal SSA cable, connect the SSA cable to the SSA

adapter. Refer to the

PCI SSA 4-Port RAID Adapter Installation Guide

for

information on connecting the SSA cable to the SSA adapter. The cable should

be routed up and placed in the cable holders under the top of the system and

routed through the top cable exit hole beside the fan assembly. Continue with

step 14 on page 5-74.

13. If you are using the external SSA bulkhead cable:

a. Remove the bulkhead plate at the rear of the system.

b. Attach the SSA bulkhead cable to the inside rear of the system using the two

screws that you removed from the plate.

c. Apply the three cable retainers as shown in the illustration.

Attention: The cable retainers must be applied with the clamp opening

towards the I/O planar cover against the inside lip away from the I/O planar

cover, as shown.

d. Place the SSA bulkhead cables into the three retainers.

Chapter 5. Installing Options 5-73

1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 363 364

Komentáře k této Příručce

Žádné komentáře

IBM F50 Uživatelský manuál Strana 217

Komentáře k této Příručce

Související produkty a manuály pro Servery IBM F50