Ibm HANDBOOK 260 Uživatelský manuál Strana 255
- Strana / 286
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Hints and Tips 237
• Your SPOT server in the bootp
server address field.
• Your client's gateway in the
gateway address field. If broadcasting will be
used to obtain a boot image, leave these IP address fields empty.
• Specify the
subnet mask for your client machine if you are prompted for
one in the subnet mask field. All machines in your subnet have the
same subnet mask.
7. After you specify the addresses, press Enter to save the addresses and
continue.
8. The RIPL screen is displayed. Select the Ping option and try to ping the
server.
9. Go back to the SMS main menu and select the Multiboot function. Enter
the Boot Sequence menu and select the network adapter to be used as
the client's boot device.
10.After making your selections, you can boot the machine over the network.
8.6 Using the Error Logging Facility
Problem determination is much easier when you have some information
about the nature of the problem that occurs. To enable access to more
detailed information about problems that occur in your system, you should
install the AIX error logging feature of AIX.
The error logging features are provided with the
bos.sysmgt.serv_aid fileset.
Once this fileset is installed, you will be able to use the
errpt command to
look at the AIX error log. The command:
errpt -a |more
will display all the information in the error log starting from the most recent
entry. Not all entries in the error log are errors. For example, every time the
system is powered on, an entry will be logged to say that the error log has
been turned on.
The error log is useful for resolving problems before they make an impact on
your system. By regularly checking the error log, for example, you could
discover that your hard disk was receiving temporary errors and was
performing block relocations. If the errors were frequent (for example, every
day), you could take actions to replace the disk without impacting the users.
To clear the error log, you can use the
errclear command. For example, to
clear all the entries from the error log, you would run the command:
- SG24-5144-00 1
- October 1998 3
- Contents 5
- © Copyright IBM Corp. 1998 ix 11
- © Copyright IBM Corp. 1998 xi 13
- Comments Welcome 17
- © Copyright IBM Corp. 1998 1 19
- RS/6000 Introduction 3 21
- RS/6000 Introduction 5 23
- RS/6000 Introduction 7 25
- 1.5 Performance Results 27
- RS/6000 Introduction 11 29
- 1.5.2 Performance Summary 31
- 1.6.1 Microprocessor Future 31
- 1.6.2 Universal Serial Bus 32
- 1.6.4 IEEE 1394 33
- 1.7 Workgroup Conferencing 33
- RS/6000 Introduction 17 35
- 1.8 Year 2000 36
- RS/6000 Introduction 19 37
- Chapter 2. Hardware Overview 39
- 2.1.2 Platform Topology 40
- Hardware Overview 23 41
- 2.2 The Hardware Design 44
- Hardware Overview 29 47
- Hardware Overview 31 49
- 2.3 Bus Architecture 50
- Procssor 51
- 166, 200 51
- 233, 375 51
- 2.3.3 The 60X and 6XX Bus 52
- 2.3.4 The 6XX-MX I/O Bus 52
- 2.3.5 The X-Bus 53
- 2.4 The Processor Subsystem 53
- Hardware Overview 37 55
- 2.5.1 Memory Hierarchy 57
- Figure 12. Memory Hierarchy 58
- Hardware Overview 41 59
- Hardware Overview 43 61
- Hardware Overview 45 63
- Figure 17. False Sharing 64
- Hardware Overview 47 65
- © Copyright IBM Corp. 1998 49 67
- 3.1.1 Standard Features 68
- 3.1.5 Service Package 85
- 3.2.2 Standard Features 87
- J1 Operator panel power 89
- J2 Operator panel audio 89
- Order Number Title 96
- 3.2.6 Service Package 112
- 4.1 Storage Boot Devices 115
- 4.2 SCSI Overview 115
- 4.2.1 SCSI-I 115
- 4.2.2 SCSI-II 116
- 4.2.3 SCSI-III 117
- 4.2.4 SCSI Terminology 120
- 4.2.5 SCSI Repeaters 122
- 4.3 SCSI Cabling 123
- cfgmgr run 126
- 4.6 Internal SCSI Devices 138
- 4.6.2 Internal CD-ROM Drive 139
- 4.6.3 Internal Tape Drives 140
- 4.7 Internal SSA devices 141
- 4.8 PCI Storage Adapters 142
- 4.8.1 SCSI Adapters 142
- 4.8.2 SSA Adapter 142
- 5.1 Communication Adapters 145
- 5.1.1 Token-Ring Adapter 145
- 5.1.2 Ethernet Adapters 146
- 5.1.3 ISDN Adapters 146
- 5.1.4 FDDI Adapters 147
- 5.1.5 ATM Adapters 149
- 5.1.6 Multiple Port Adapters 151
- 5.1.7 WAN Adapters 151
- 5.1.8 Miscellaneous Adapters 152
- 5.2 Graphics Adapters 153
- 5.2.1 POWER GXT120P (# 2838) 153
- 5.2.3 POWER GXT550P (# 2845) 155
- Table 34. Graphics Adapters 158
- 5.3.1 Device Types 164
- AB-CD-EF-GH 165
- AB-CD-EF-G,H 165
- smit devices 169
- 6.2 Stand-Alone Diagnostics 175
- 6.3 On-line Diagnostics 176
- 6.3.1 Service Mode 177
- 6.3.2 Concurrent Mode 178
- 6.3.3 Single-User Mode 179
- Diagnostic 186
- OK code when 187
- 6.6 Power-On Self-Test 188
- 6.6.1 Processor POST 188
- 6.6.3 Graphics Adapter POST 189
- 6.6.5 SCSI Subsystem POST 190
- 6.7.1 SMS Start-Up 191
- 6.7.3 SMS ASCII Main Menu 198
- ACSII Terminal Settings 198
- 6.7.4 SMS Firmware Update 198
- ./filename.bin 199
- before 200
- FEB, the 201
- RS/6000 202
- Chapter 7. Service Processor 203
- Service Processor 187 205
- 7.4.1 Pre-Standby Phase 207
- 7.4.2 Standby Phase 207
- 7.4.3 Bring-Up Phase 208
- 7.4.4 Run-time Phase 208
- 7.5 Main Menu 209
- Enabled or Disabled 213
- YES and the operating system 215
- 7 modem_z_sp. For more 222
- 38000 57600 115200 224
- 7.5.6 Set System Name 227
- 7.6 General User Menu 227
- Service Processor 211 229
- <filename> 230
- SA38-0554 231
- Chapter 8. Hints and Tips 233
- 8.2 Entering Debug Mode 234
- 8.3 Backup and Cloning 234
- 8.3.1 The bootinfo Command 234
- Hints and Tips 217 235
- 8.3.4 Cloning 236
- bos.rte.mp 237
- Sample Script: 239
- installp 241
- # bootinfo -p 243
- Hints and Tips 227 245
- Hints and Tips 229 247
- Hints and Tips 231 249
- Hints and Tips 233 251
- System Firmware: 253
- 8.5 Network Boot Support 254
- Hints and Tips 237 255
- 8.7 Booting Problems 256
- 8.7.1 Booting from CD-ROM 256
- Hints and Tips 239 257
- $TERM variable so that 258
- TERM=ibm3151 258
- A.3 Standard Features 261
- RAM (Memory) Up to 768 MB 262
- System Expansion 262
- Appendix B. Special Notices 265
- Special Notices 249 267
- C.2 Redbooks on CD-ROMs 269
- C.3 Other Publications 269
- C.4 Web Resources 270
- How to Get ITSO Redbooks 271
- IBM Redbook Order Form 273
- List of Abbreviations 275
- Numerics 277
- ITSO Redbook Evaluation 285
- Printed in the U.S.A 286
Související produkty a manuály pro Počítače Ibm HANDBOOK 260
Počítače Ibm Aptiva 2142 Uživatelský manuál
(212 stránky)
(212 stránky)
Počítače Ibm 2274 Uživatelský manuál
(183 stránky)
(183 stránky)
Počítače Ibm 6643 Uživatelský manuál
(128 stránky)
(128 stránky)
Počítače Ibm X3650 M3 Uživatelský manuál
(21 stránky)
(21 stránky)
Počítače Ibm F50 RS/6000 7025 Uživatelský manuál
(364 stránky)
(364 stránky)
Počítače Ibm xSeries 235 Uživatelský manuál
(66 stránky)
(66 stránky)
Počítače Ibm RS/6000 Uživatelský manuál
(228 stránky)
(228 stránky)
Počítače Ibm 6644 Uživatelský manuál
(100 stránky)
(100 stránky)
Počítače Ibm 1483DSV Uživatelský manuál
(141 stránky)
(141 stránky)
Počítače Ibm 47AE - 410168 Uživatelský manuál
(27 stránky)
(27 stránky)
Počítače Ibm 4190 Uživatelský manuál
(84 stránky)
(84 stránky)
Počítače Ibm BladeCenter T Type 8720 Uživatelský manuál
(180 stránky)
(180 stránky)
Počítače Ibm GC09-2830-00 Uživatelský manuál
(196 stránky)
(196 stránky)
Počítače Ibm Novell 10 SP1 EAL4 Uživatelský manuál
(246 stránky)
(246 stránky)
Počítače Ibm A40 TYPE 6840 Uživatelský manuál
(148 stránky)
(148 stránky)
Počítače Ibm NETVISTA 6824 Uživatelský manuál
(60 stránky)
(60 stránky)
LG V-4030T Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Staubsauger LG V-4030T.
Wir stellen 1 PDF-Handbücher LG V-4030T zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Komentáře k této Příručce